Table of Contents
Advertisement
Turn the rotary selector to the right and set the
5.
required combi mode.
The combi mode and the default cooking time are
shown in the display.
Touch the ¿ arrow.
6.
The cooking time can be set.
Use the rotary selector to set the required cooking
7.
time.
Press the start/stop button to start.
8.
The appliance starts the operation. The cooking time
counts down on the display.
Notes
The default value for the grill is Grill 3.
■
Turn the rotary selector to the left to set Grill 2 and 1.
Turn the rotary selector to the right to select a combi
mode; Grill 3 with 360 W, Grill 3 with 180 W and so
on.
If you open the appliance door when the appliance
■
is in use, the fan may continue to run.
Cooking time elapsed
An audible signal sounds.
Operation has finished.
Stopping the audible signal early:
Touch the 0 button.
After touching the 0 button, the timer function
Note:
appears; after a short time, it automatically disappears.
If you touch the 0 button again, the timer function will
disappear instantly.
Press the On/Off button to switch off the appliance.
Changing the cooking time
This can be done at any time.
Use the rotary selector to change the cooking time.
The operation continues.
Changing the combi mode
This can be done at any time.
Use the ¾ arrow to change the combi mode.
Use the rotary selector to set the required combi mode.
The cooking time remains unchanged.
The operation continues.
When changing the operating mode from grill to
Note:
combi mode, and vice versa, the appliance pauses. The
operation stops. If you want to change the operating
mode, continue the operation by pressing the start/stop
button.
OTimer
You can use the timer as a kitchen timer. The timer runs
T i m e r
alongside other settings. You can set it at any time,
even if the device is switched off. It has its own audible
signal so that you can tell whether it is the timer or a
cooking time which has elapsed.
Setting the timer
The maximum setting is 24 hours.
The higher the value, the longer the time intervals.
Press the 0 button.
1.
The timer is displayed.
Use the rotary selector to set the timer duration.
2.
Press the 0 button to start.
3.
The timer will also start automatically after a
Note:
few seconds.
The timer duration counts down. The display switches
back after a short time. A timer symbol and the elapsed
time are shown in the status bar.
An audible signal sounds once the timer duration has
come to an end. Use the 0 button to cancel the audible
signal early.
Notes
The timer remains visible in the display if the
■
appliance is switched off.
If an operating mode is running, touch the 0 button
■
to display the timer. The timer duration is displayed
for a few seconds and can be altered.
Changing the timer
Touch the 0 button to change the timer duration. The
timer duration is displayed – use the rotary selector to
change it.
Cancelling the timer
If you want to cancel the timer, reset the duration on the
timer to zero. Once the change has been applied, the
symbol is no longer lit up.
Timer
en
15
Advertisement
Table of Contents
