Table of Contents
Advertisement
30" GAS RANGE INSTALLATION INSTRUCTIONS
(For gas venturi models with electric ignition)
Model and Serial Number Location
The serial plate is located under the lift-up cooktop. When
ordering parts for or making inquires about your range, always
be sure to include the model and serial numbers and a lot
number or letter from the serial plate on your range. Your serial
plate also tells you the rating of the burners, the type of fuel
and the pressure the range was adjusted for when it left the
factory.
Before You Call for Service
Check to make sure the house fuses or circuit breakers for
your range are not blown or open. Refer to the Avoid Service
Checklist and operating instructions in your Owner's Guide. It
may save you time and expense. The list includes common
occurrences that are not the result of defective workmanship
or materials in this appliance.
Refer to the warranty in your Owner's Guide for our
toll-free service number and address. Please call or
write if you have inquiries about your range product and/
or need to order parts.
Care, Cleaning and Maintenance
Refer to the Owner's Guide for operating and cleaning
instructions.
If removing the range for cleaning or maintenance, shut off gas
supply. Disconnect the gas and electrical supply. If the gas or
electrical supply is inaccessible, lift the appliance slightly at
the front and pull out away from the wall. Pull only as far as
necessary to disconnect the gas and electrical supply. Finish
removing the unit for servicing and cleaning. Reinstall in
reverse order making sure to level the range and check gas
connections for leaks. See Anti-Tip Instructions for proper
anchoring instructions.
8
Advertisement
Table of Contents
