Connecting To Video Equipment - Sanyo PLC-SE15 Owner's Manual

CONNECTING TO VIDEO EQUIPMENT

Cables used for connection
• Video Cable (RCA x 1 or RCA x 3)
✽
• S-VIDEO Cable
✽
• Audio Cable (RCA x 2)
Video Source (example)
Video Cassette Recorder
RGB Scart
21-pin Output
Scart-VGA
✽
Cable
COMPUTER IN 2 / MONITOR OUT
NOTE
It is necessary to select
COMPUTER 2 in the
SETTING Menu when
this terminal is used as
RGB Scart 21-Pin Video
Input. (See page 22, 36.)
Use any of VIDEO jack, S-VIDEO
jack, or Y-Pb/Cb-Pr/Cr jacks.
• When both VIDEO jack and S-
VIDEO jack are connected, S-
VIDEO jack has priority over
VIDEO jack.
• When both Y-Pb/Cb-Pr/Cr jacks
and S-VIDEO jack are connected,
Y-Pb/Cb-Pr/Cr jacks has priority
over S-VIDEO jack.
NOTE :
When connecting the cable, the power
cords of both the projector and the external
equipment should be disconnected from
AC outlet.
( ✽ = Cable is not supplied with this projector.)
✽
Video Disc Player
Composite
S-VIDEO Output
Video Output
S-VIDEO Video Cable
Cable ✽ (RCA x 1) ✽
S-VIDEO VIDEO
COMPUTER IN 1
DVI - I
R – AUDIO IN – L (MONO)
AUDIO IN
S – VIDEO
COMPUTER
COMPUTER IN 2 /
MONITOR OUT
CONNECTING PROJECTOR
• Scart-VGA Cable ✽
Component video output equipment.
(such as DVD player or high-definition TV source.)
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Video Cable
(RCA x 3)
Y - Pb/Cb - Pr/Cr
VIDEO
Y – Pb / Cb – Pr / Cr
R – AUDIO OUT – L
RESET
USB CONTROL PORT
AUDIO OUT
Audio Cable
(Stereo) ✽
Audio Input
External Audio Equipment
Audio Speaker
Audio Amplifier
(stereo)
Audio Output
(R, L)
Audio Cable
✽ (RCA x 2) ✽
AUDIO IN
Terminals
of the Projector
13