Custom Wireless Flash Shooting - Canon EOS 600D Instruction Manual

Custom Wireless Flash Shooting
Fully,automatic Shooting with One E×temal Speedlite and
Built.in Flash
This describes fully-automatic wireless
flash shooting with one external
Speedlite and the built-in flash.
You can change the flash ratio between
the external Speedlite and built-in flash
to adjust how the shadows look on the
subject.
On the menu screens, the <-:'_> and
<=_> icons refer to the external
Speedlite, and the <-:,_ > and <._%_>
icons refer to the built-in flash.
_I Select [CustWireless].
®_ Follow step 5 on page 192 to select
[CustWireless], then press <_-_>.
*_,_,_ Select [Wireless func.].
_ For [Wireless func.], select [-:=_:-:,_ ],
then press <8>.
Set the desired flash ratio and
take the picture.
_, Select [-:'_ :-:=%_ ] and set the flash ratio
within 8:1 to 1:1. Setting a flash ratio to
the right of 1:1 (up to 1:8) is not possible.
_ If the built-in flash output is not
enough, set a higher ISO speed (p.79).
[] The 811 to i:1 flash ratio is equivalent to 3:1tO 1 :i Stops (1/2-stop ........
increments).
194