Canon EOS 600D Instruction Manual page 101

Easy Wireless Flash Shooting
5
Select [Built=in flash rune.
setting].
® Select [Built-in flash func. setting],
then press <8>.
Select [EasyWireless].
® For [Built-in flash], select
[EasyWireless], then press <_-_>.
Set [Channel].
® Set the channel (1-4) to the same one
as the slave unit.
Take the picture.
® As with normal flash shooting, you
can set the camera and take the
picture in the same way.
Exit the wireless flash shooting.
® For [Built-in flash func. setting],
select [NormaIFiring].
[] ;,_ setting [E,TTL II meter.] tO [Evaluative] is recommended.
® With [EasyWireless], even if you disable the built-in flash from firing, it
wi!l Stil! fire to £ont[o! the Slave Unit. Depending On Sheeting Conditions,
the flash fired to cont[o! the slaye unit may appear in the picture.
® Firing a test flash is not possible with the slave unit.
192