Table of Contents
Advertisement
Quick Links
We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance's aesthetic and functional qualities.
For further information on the product: www.smeg.com
Contents
46
46
47
47
47
48
48
48
49
49
50
50
52
52
54
54
55
56
57
58
58
60
62
66
66
66
67
68
68
70
72
74
75
75
78
83
84
45
Advertisement
Table of Contents
Related Manuals for Smeg TR4110RO
Summary of Contents for Smeg TR4110RO
-
Page 1: Table Of Contents
5.2 Adaptation to different types of gas 5.3 Electrical connection 5.4 Positioning We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www.smeg.com... -
Page 2: Instructions
Instructions 1 Instructions • Do not insert pointed metal objects (cutlery or utensils) into the slots in the 1.1 General safety instructions appliance. • Do not try to repair the appliance Risk of personal injury yourself or without the intervention of •... -
Page 3: Manufacturer Liability
Instructions 1.4 Disposal For this appliance This appliance must be disposed of • Ensure that the appliance is switched off separately from other waste before replacing the bulb. (Directives 2002/95/EC, 2002/ • Do not rest any weight or sit on the open 96/EC, 2003/108/EC). -
Page 4: Identification Plate
Instructions Our appliances are packed in non- 1.7 How to read the user manual polluting and recyclable materials. This user manual uses the following reading • Consign the packing materials to the conventions: appropriate selective collection centres. Instructions Plastic packaging General information on this user Danger of suffocation manual, on safety and final... -
Page 5: Description
Description 2 Description 2.1 General description 1 Skirt 6 Door 2 Cooking hob 7 Fan 3 Control panel 8 Storage compartment 4 Oven light Shelf for racks/trays support frames 5 Seal... -
Page 6: Cooking Hob
Description 2.2 Cooking hob AUX = Auxiliary R = Rapid SR = Semi-rapid UR2 = Ultra rapid 2.3 Control panel 1 Hob burner knobs 2 Programming clock Useful for lighting and adjust the hob Useful for displaying the current time, set burners. - Page 7 Description 4 Auxiliary oven variable grill indicator 8 Upper multifunction oven temperature light knob The indicator light comes on to indicate that This knob allows you to select the cooking the auxiliary oven is heating up. It turns off temperature and the Vapor Clean as soon as it reaches the set temperature.
-
Page 8: Other Parts
Description 2.4 Other parts 2.5 Available accessories Oven shelves Some models are not provided The oven features shelves for positioning with all accessories. trays and racks at different heights. The insertion heights are indicated from the Rack bottom upwards (see 2.1 General description). - Page 9 Description Oven tray Reduction pan stand Useful when using small cookware. WOK Reduction pan stand Useful for collecting fat from foods placed on the rack above. Deep tray Useful when using a wok. The accessories intended to come into contact with food are made of materials that comply with the provisions of current legislation.
-
Page 10: Use
3 Use Improper use Danger of burns 3.1 Instructions High temperature inside the oven • Make sure that the flame-spreader during use crowns are correctly positioned in their housings with their respective burner Danger of burns caps. • Keep the oven door closed during •... -
Page 11: First Use
3.2 First use Improper use 1. Remove any protective film from the Risk of damage to surfaces outside or inside of the appliance, including accessories. • Do not cover the bottom of the oven with 2. Remove any labels (apart from the aluminium or tin foil sheets. -
Page 12: Using The Accessories
3.3 Using the accessories Tray rack The tray rack has to be inserted into the tray. Racks and trays In this way fat can be collected separately Racks and trays have to be inserted into the from the food which is being cooked. side guides until they come to a complete stop. -
Page 13: Using The Hob
3.4 Using the hob Correct position for flame-spreader crowns and burner caps All the appliance's control and monitoring devices are located together on the front Before lighting the hob burners, make sure panel. The burner controlled by each knob that the flame-spreader crowns are is shown next to the knob. -
Page 14: Using The Storage Compartment
3.5 Using the storage compartment The storage compartment is at the bottom right of the cooker. It can be used to store cookware or metallic objects necessary when using the appliance. Multifunction oven doors do not block laterally when opening and they might close. - Page 15 Functions list Fan-assisted static The operation of the fan, combined with traditional cooking, ensures Depending on the function it is uniform cooking even with complex used with, it ensures maximum recipes. Perfect for biscuits and energy savings during cooking. cakes, even when simultaneously cooked on several levels.
-
Page 16: Cooking Advice
3.7 Cooking advice Grill The heat coming from the grill General advice element gives perfect grilling results • Use a fan-assisted function to achieve above all for thin and medium uniform cooking at several levels. thickness meat and in combination •... - Page 17 • Foods should be seasoned before Advice for defrosting and proving cooking. Foods should also be coated • Place frozen foods without their with oil or melted butter before cooking. packaging in a lidless container on the • Use the oven tray on the first bottom shelf first shelf of the oven.
-
Page 18: Programming Clock
3.8 Programming clock Setting the time If the time is not set, the oven will not switch on. On the first use, or after a power failure, the digits will be flashing on the appliance's display. 1. Press the keys at the same time. - Page 19 Timed cooking 6. Press keys at the same time to reset the programmer clock. Timed cooking is the function which allows a cooking operation It is not possible to set a cooking to be started and then ended after time of more than 10 hours. a specific length of time set by the user.
- Page 20 3. Use the key to set the required 2. Use the key to set the required minutes. minutes. 4. Wait approx. 5 seconds without pressing 3. Wait approx. 5 seconds without pressing any key in order for the function to any key to finish setting the timer.
- Page 21 Cooking information table Runner posi- Weight Temperature Food Function tion from the Time (minutes) (Kg) (°C) bottom Lasagne 3 - 4 Static 220 - 230 45 - 50 Pasta bake 3 - 4 Static 220 - 230 45 - 50 Roast veal Fan assisted 180 - 190...
-
Page 22: Cleaning And Maintenance
Cleaning and maintenance 4 Cleaning and maintenance Ordinary daily cleaning Always use only specific products that do 4.1 Instructions not contain abrasives or chlorine-based acids. Improper use Pour the product onto a damp cloth and Risk of damage to surfaces wipe the surface, rinse thoroughly and dry with a soft cloth or a microfibre cloth. -
Page 23: Removing The Door Of The Auxiliary Oven
Cleaning and maintenance 4.3 Removing the door of the Flame-spreader crowns and burner caps auxiliary oven For easier cleaning, the flame-spreader crowns and the burner caps can be For easier cleaning, the door can be removed. Wash them in hot water and non- removed and placed on a canvas. -
Page 24: Cleaning The Door Glazing
Cleaning and maintenance and once it is in place remove the pins detach from their housings in the oven from the holes in the hinges. door. 4.4 Cleaning the door glazing The glass in the door should always be kept 3. - Page 25 Cleaning and maintenance 4. Remove the intermediate glass panel. 7. Reposition the internal glass panel. Take First raise it upwards (1) and then care to centre and insert the 4 pins into remove it pulling it downwards (2). their housings in the oven door by applying slight pressure.
-
Page 26: Cleaning The Inside Of The Oven
Cleaning and maintenance 3. Remove the intermediate glass panel by 4.6 Cleaning the inside of the oven lifting it upwards. For the best oven upkeep, clean it regularly after having allowed it to cool. Take out all removable parts. 4. Clean the external glass panel and the panels previously removed. - Page 27 Cleaning and maintenance Removing racks/trays support frames Cleaning the top section Removing the guide frames enables the The oven cavity is fitted with a tilting heating sides to be cleaned more easily. This element which facilitates cleaning the top operation should be performed each time part (roof) of the oven.
-
Page 28: Vapor Clean: Assisted Oven Cleaning
Cleaning and maintenance 4.7 Vapor Clean: assisted oven cleaning Vapor Clean is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this process, it is possible to clean the inside of the oven very easily. The dirt residues are softened by the heat and water vapour for easier removal •... - Page 29 Cleaning and maintenance Vapor Clean setting End of the Vapor Clean cycle 1. Turn the function knob and the 5. Open the door and wipe away the less stubborn dirt with a microfibre cloth. temperature knob to the symbol. 6. Use an anti-scratch sponge with brass 2.
-
Page 30: Extraordinary Maintenance
Cleaning and maintenance 4.8 Extraordinary maintenance 5. Replace the lamp with one of the same type (40W). Live parts 6. Refit the cover correctly, so that the Danger of electrocution moulded part of the glass is facing the door. • Disconnect the oven power supply. 7. -
Page 31: Installation
Installation 5 Installation Connection with a rubber hose Verify that all following conditions are met: 5.1 Gas connection • the hose is fixed to the hose connection with safety clamps; Gas leak • no part of the hose is in contact with hot Danger of explosion walls (max. - Page 32 Installation 5 that is compliant with the standard in Connection with a flexible steel hose with bayonet fitting force. Carry out the connection to the gas mains using a flexible steel hose with bayonet fitting compliant with B.S. 669. Apply insulating material to the thread of the gas pipe connector 4 and then tighten the adapter 3.
- Page 33 Installation Connection with a flexible steel hose with Room ventilation conical fitting The room containing the appliance should Make the connection to the gas mains have a permanent air supply in accordance using a continuous wall flexible steel hose with the standards in force. The room where whose specifications comply with the the appliance is installed must have enough current regulations.
-
Page 34: Adaptation To Different Types Of Gas
Installation When the job is complete, the installer must 5.2 Adaptation to different types of issue a certificate of conformity. In case of operation with other types of gas, the burner nozzles must be changed and the minimum flame adjusted on the gas taps. - Page 35 Installation Adjusting the minimum setting for natural Adjusting the minimum setting for LPG or city gas Tighten the screw located at the side of the Light the burner and turn it to the minimum tap rod clockwise all the way. position.
- Page 36 Installation Gas types and Countries Gas types IT GB-IE FR-BE DE RU DK 1 Natural Gas G20 20 mbar • • • • • • • • • G20/25 20/25 mbar • 2 Natural Gas G20 25 mbar • 3 Natural Gas G25 25 mbar •...
- Page 37 Installation Burner and nozzle characteristics tables Natural Gas Rated heating capacity (kW) Nozzle diameter (1/100 mm) 75 + 135 Pre-chamber (printed on nozzle) (H1) + (H3) Reduced capacity (W) 1900 Natural Gas Rated heating capacity (kW) Nozzle diameter (1/100 mm) 75 + 125 Pre-chamber (printed on nozzle) (H8)
- Page 38 Installation Liquid Gas G30/31 Rated heating capacity (kW) Nozzle diameter (1/100 mm) 46 + 91 Pre-chamber (printed on nozzle) Reduced capacity (W) 1900 Rated capacity G30 (g/h) Rated capacity G31 (g/h) Liquid Gas G30/31 Rated heating capacity (kW) Nozzle diameter (1/100 mm) 46 + 85 Pre-chamber (printed on nozzle) Reduced capacity (W)
-
Page 39: Electrical Connection
Installation 5.3 Electrical connection The appliance can work in the following modes: Power voltage • 220-240 V 1N~ Danger of electrocution • Have the electrical connection performed by authorised technical personnel. use a 3 x 6 mm² three-core cable. • The appliance must be connected to earth in compliance with electrical •... -
Page 40: Positioning
Installation Fixed connection Heat production during appliance Fit the power line with an omnipolar circuit operation breaker in compliance with installation Risk of fire regulations. The circuit breaker should be located near • Veneers, adhesives or plastic coatings the appliance and in an easily reachable on adjacent furniture should be position. - Page 41 Installation Assembling the skirt The skirt provided is an integral part of the product; it must be fastened to the appliance prior to installation. The skirt must always be positioned and secured correctly on the appliance. 1. Loosen the 6 screws on the back of the top (A) and unscrew the 2 screws (B) on the side part of the skirt.
- Page 42 Installation Positioning and levelling the appliance Mounting the bottom skirting After making the electrical and/or gas The bottom skirting provided is an connections, properly level the appliance integral part of the product; it must on the floor to ensure better stability. Screw be fastened to the appliance prior or unscrew the bottom part of the foot until to installation.