Canon elura10 Instruction Manual page 31

If your TV (or VCR) has audio/video input terminals
• Connect the camera using the STV-250N Stereo Video Cable. Connect the white
plug to the white audio terminal L (left). Connect the red plug to the red audio
terminal R (right). Connect the yellow plug to the yellow video terminal
VIDEO.
• If you are connecting the camera to a TV, set the TV/VIDEO selector on the
television to VIDEO.
• If you are connecting the camera to a VCR, set the input selector on the VCR to
LINE.
• If you are going to use the TV as a monitor while you are shooting, remember
to keep the TV volume turned down as long as the camera's audio terminals are
connected. If the sound from the TV speakers is picked up by the microphone,
an unpleasant high-pitched squeal, called feedback, may be produced.
• For TVs having the Video ID-1 system:
If you connect the camera to the TV's S terminal or video in terminal,
recordings made in the 16:9 mode for wide screen TVs will automatically play
back in wide screen mode on the TV screen.
STV-250N Stereo Video Cable
INPUT
VIDEO
AUDIO
L
R
E
31