Erasing Still Images - Canon elura10 Instruction Manual

Erasing Still Images

E
CARD
This section describes how to erase the still image from the Card Operation
submenu when playing back a single image in CARD PLAY mode. (SINGLE or
ALL)
You can also erase a still image through CARD PHOTO REVIEW (
File Operation menu (
CARD
PLAY
( 35)
Make sure a memory card that has images recorded on it is inserted into the
camera.
To erase images one at a time
1. Select the image you want to erase.
• Use the index screen (
and make sure the image you want to erase fills the display.
• If you use the index screen, press the INDEX SCREEN button after
selecting the image. The image you selected fills the whole display.
2. Open the menu and select CARD OPER.
3. Select IMAGE ERASE.
• CANCEL, SINGLE and ALL settings appear.
• To cancel erasing, select CANCEL and close the menu.
4. Select SINGLE.
• ERASE THIS IMAGE? NO YES appears in the display.
5. Select YES and press the SELECT dial in.
• The image is erased and the previous image appears.
• To erase another single image, move to that image with the CARD +/–
buttons, and select YES.
• If the image you are trying to erase is a protected image, YES appears in
purple and is unselectable.
• If you select NO, you return to step 4.
6. Close the menu.
110
106).
CARD OPER.
103) or card jump function (
IMAGE ERASE
SLIDE
CARD SHOW
105) or
103) if necessary