Miele KM 7999 FL Manual page 9

Installation
Installation notes –
flush-fit
A flush-fit cooktop is suitable only for
installation in natural stone (granite,
marble), solid wood and tiled
worktops. When using a worktop
made from any other material, please
check first with the worktop
manufacturer that it is suitable for
installing a flush-mounted cooktop.
The internal width of the base unit
underneath the appliance must be at
least as wide as the inner worktop cut-
out (see "Installation dimensions –
Flush"), so that the cooktop is easily
accessible from underneath after
installation and the bottom half of the
casing can be removed for
maintenance. If the underside of the
cooktop is not freely accessible after
installation, any sealant used to plug
the gaps around the appliance must
be removed to enable the cooktop to
be lifted out of the cut-out should this
be necessary.
11373090-01
Natural stone worktops
The cooktop is placed directly in the
cut-out.
Solid wood worktops, tiled worktops,
glass worktops
The cooktop is placed on a wooden
frame inside the cut-out. The frame
must be provided on site and is not
supplied with the appliance.
Sealing strip
Dismantling the cooktop for service
purposes may damage the sealing
strip underneath the edge of the
cooktop.
Always replace the sealing strip
before reinstalling the cooktop.