Canon Elura 2 Instruction Manual page 92

4_ELURA2_E(80-92)
Selecting audio output channels
E
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
VCR
( 34)
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
OUTPUT CH setting
L/R
L/L
R/R
92
7/25/00 17:16 Page 92
VCR SET UP
Tape recorded with
stereo sound
L+R channels
L channel only
R channel only
OUTPUT CH•••L/R
Played back sound
Tape recorded on
multiple channels
main + sub
main only
sub only