Canon Elura 2 Instruction Manual page 19

2_ELURA2_E(08-32)
Confirmation/Warning beeps
The camera's short operation confirmation beeps are indicated by ` in the
illustrations. Beeps sound upon certain camera operations such as when you turn
the camera on, during the self-timer countdown, right before the camera's
automatic shut-off, and also upon any unusual condition of the camera. Beeps are
not recorded on the tape.
MOVIE P.SCAN VCR
SYSTEM
( 34)
To turn the beep off, open the menu and select SYSTEM. Then select BEEP,
set it to OFF and close the menu.
About the POWER dial lock lever
The POWER dial lock lever has been preset to the 2 position. Switch it to the
22 position when you want to use the P. SCAN (
(ELURA2 MC only,
lever to the 2 position when you finish recording.
ELURA2
ELURA2 MC
7/25/00 17:03 Page 19
CARD CARD
R E C PLAY
97) modes. It is recommended that you return the lock
2: VCR, OFF, MOVIE
22: VCR, OFF, MOVIE, P.SCAN
2: CARD PLAY, VCR, OFF, MOVIE
22: CARD PLAY, VCR, OFF, MOVIE, P.SCAN, CARD REC
BEEP••••••••ON
48) and CARD REC
E
19