Canon DVD CAMCORDER DC410 Instruction Manual page 77

- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (
CANNOT READ THE DISC
DISC
- Disc could not be recognized. Try cleaning
it ( 81) or replace the disc.
- This message can also appear if the
camcorder has exceeded its operational
temperature. Turn off the camcorder and
let it cool down before resuming use.
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (
- The disc may not be loaded correctly. Try
removing the disc and reinserting it
( 25).
CANNOT RECORD
- There is a problem with the disc.
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (
- The disc's recording surface may be dirty
or scratched.
- This message may appear when the
camcorder is repeatedly subjected to
vibrations.
CANNOT USE DISC
RECOMMENDED DISC IS ADVISED
- The disc cannot be used. We recommend
that you use a disc whose performance
has been tested with this camcorder
( 7).
CARD ERROR
- A memory card error occurred. The
camcorder cannot record or display the
image. The error may be temporary. If the
message disappears after 4 seconds and
appears in red, turn the camcorder off,
remove the card and reinsert the card. If
changes to green, you can resume
recording/playback.
CARD FULL
- The memory card is full. Erase some still
images ( 55) to free some space or
replace the memory card.
84).
CHECK THE
84).
84).
USE OF A
CHANGE THE BATTERY PACK
- The battery pack is exhausted. Replace or
charge the battery pack (
DISC ACCESS FAILURE CHECK THE DISC
- There was an error when reading the disc
or attempting to write onto it. Try cleaning
the disc ( 81) or replace it.
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (
- The disc may not be loaded correctly. Try
removing the disc and reinserting it
( 25).
DISC COVER IS OPEN
- Verify the disc is correctly inserted and
close the disc cover (
DISC FULL
- The disc is full ("
screen). Delete some recordings (DVD-RW
in VR mode) to free some space (
replace the disc.
DISC IS FINALIZED
- You cannot record additional scenes on a
finalized DVD-R/DVD-R DL disc.
- You cannot record additional scenes or
unfinalize a DVD-RW disc in VIDEO mode
that was finalized using another digital
device.
DISC MUST BE FINALIZED (
PLAY BACK IN COMPATIBLE PLAYERS
- Be sure to finalize the disc and check the
compatibility of the device before playing
back the disc on external DVD devices
( 48).
LOADING THE DISC
- The disc is being recognized. Wait before
you start recording.
NAMING ERROR
- The folder and file numbers have reached
their maximum value. Set
[IMG NUMBERS] to [RESET] and erase all
the images on the memory card (
or initialize it (
NO CARD
- There is no memory card in the camcorder
( 27).
Additional Information
18).
84).
25).
END" appears on the
35) or
CANNOT RECORD
MODE) TO
55)
57).
• 77