Selecting The Video Quality (Recording Mode); Changing The Aspect Ratio Of The Recordings (Widescreen / 4:3); Zooming: Optical, Advanced And Digital Zoom - Canon DVD CAMCORDER DC410 Instruction Manual

Selecting the Video Quality
(Recording Mode)
The camcorder offers 3 recording
modes. Changing the recording mode
will change the recording time available
on the disc. Select XP mode for better
movie quality; select LP mode for longer
recording times.
The following table gives approximate
recording times with a brand new DVD
disc (on a single recording side).
Recording mode
FUNC.
[ STANDARD PLAY 6 Mbps]
Desired recording mode
FUNC.
NOTES
• In LP mode, recordings are more liable to
be affected by imperfections of the disc
used or recording conditions and you
may experience some anomalies (blocky
video artifacts, banding, skipping audio,
etc.) during playback. We recommend
using XP or SP mode for important
recordings.
• The camcorder uses a variable bit rate
(VBR) to encode video so the actual
recording times will vary depending on
the content of the scenes.
30 •
Video
Default value
Disc type
DVD-R,
DVD-R DL
DVD-RW
20 min. 36 min.
30 min. 54 min.
60 min. 108 min.
(
Changing the Aspect Ratio of the
Recordings (Widescreen / 4:3)
The default aspect ratio of movies is
16:9 (widescreen). Follow the procedure
below to change it to 4:3.
FUNC.
[ MENU]
[ CAMERA SETUP]
[WIDESCREEN]
FUNC.
NOTES
• Playing back a widescreen recording:
TV sets compatible with the Video ID-1
system will switch automatically to 16:9
mode. Otherwise, change the aspect
ratio of the TV manually.
• To play back on a TV with normal aspect
ratio (4:3) change the [TV TYPE] setting
accordingly (
21)
Zooming: Optical, Advanced and Digital
Zoom
The camcorder offers three types of
zoom when recording movies: optical,
advanced and digital zoom (In
zoom is available.) You can also change
the zoom speed.
[ OFF]
72).
mode, only the optical
( 21)