1.
Unpacking and Installation
1.1.
Unpacking
•
This product is packed in a carton, together with the standard accessories.
•
Any other optional accessories will be packed separately.
•
Due to the size and weight of this display it is recommended for two people to move it.
•
After opening the carton, ensure that the contents are complete and in good condition.
1.2.
Package Contents
Please verify that you received the following items with your package content:
•
LCD display
•
Quick start guide
•
Remote control with AAA batteries
•
Power cord
•
RS232 cable
•
RS232 daisy chain cable
•
IR sensor cable
•
USB cover and screw x1
NOTES:
•
For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the
safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm
•
Keep the packaging materials appropriately after unpacking the product.
1.3.
Installation Notes
•
Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
•
The product should be installed on a flat surface, or the product may tip over. Leave a space between the rear of the product and the wall for proper
ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to do so may shorten the life of the internal
parts.
•
Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.
LCD display
* The supplied power cord varies depending on destination.
Power Cord
RS232 Daisy Chain Cable
IR Sensor Cable
* Items may differ in different locations
* Display design and accessories may differ from the images shown.
1
Quick start guide
RS232 Cable
USB Cover
Screw
2
should be used).
NORMAL
ID
SOURCE
FORMAT
LIST
INFO
ADJUST
OPTIONS
VOL
ID SET
ENTER
Remote Control
and AAA Batteries