2-4-2 Station-Infrastructure
In this mode, you can connect the access point to Ethernet device such us
TV and Game player to enable the Ethernet device be a wireless station
and join to a wireless network through an access point or AP router.
Here are descriptions of every setup item:
Band
Main ESSID
Site Survey
Please select the wireless band you wish to use. By
selecting different band setting, you‟ll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this access point,
select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify
this wireless access point) here. You can input up
to 32 alphanumerical characters. PLEASE NOTE
THAT ESSID IS CASE SENSITIVE.
When you use this access point as a wireless
station for Ethernet network device to have
wireless capability, you have to associate it with a
25