Adjusting The Volume - Canon DCD CAMCORDER Instruction Manual

Slow Forward Playback /
During playback pause, press
playback speed.
Slow playback: 1/16
Skipping Scenes
During normal playback, push the multi selector (
scene. Push the multi selector (
to skip to the beginning of the previous scene.
Except for fast playback at 1.5x the normal speed, there is no sound during
special playback modes.
The picture may become distorted during some special playback modes.
Slow playback is not available with discs initialized in VIDEO mode.
Depending on the recording, you might occasionally notice a brief stop of the
picture or sound at the point where the scene changes.
During the playback of a Photomovie scene, even though the display may
change according to the fast forward/reverse playback, the actual playback
speed will not change.

Adjusting the Volume

The camcorder plays the sound with the built-in speaker. The volume will be muted when
you close the LCD panel.
To change the operating mode, refer to About the Operating Modes (
MENU button
MENU
SYSTEM SETUP
( 31)
MENU
1. Press .
2. Select ( ) [SYSTEM SETUP] and press (
3. Select ( ) [VOLUME] and press (
4. Adjust ( ) the volume as desired and press (
To turn off the volume completely, keep pressing (
.
MENU
5. Press to save the setting and close the menu.
Slow Reverse Playback
or . Repeatedly press the button to increase the
1/8 1/4 1/2 the normal speed.
) to return to the beginning of the current scene. Repeat
) to skip to the beginning of the next
VOLUME
).
).
).
) until the volume icon changes to
9).
Speaker
Multi selector
E
27