Maintenance And Storage; Maintenance Mode And Maintenance Schedule - North Star A1573701 Owner's Manual

Maintenance Mode
Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.
1.) Turn off engine.
2.) Turn off water supply.
3.) Squeeze trigger to relieve system pressure.
4.) Shut off fuel valve.
5.) Unplug spark plug wire from spark plug, (see engine owners' manual).
Maintenance Schedule
What to Check When to Check
Inlet Filter
Pressure Hose
Bolts
Engine Oil See engine manual See engine manual for oil change instructions
Pump Oil
then 3mo/500hr

Maintenance and Storage

Each Use Visually inspect and clean inlet filter with clear water.
Visually inspect pressure hose and hose couplings. Replace
Each Use hose if any of the following is evident:
hose coupling is damaged, wire mesh is exposed or
damaged, hose is permanently kinked or flattened, outer
hose cover is blistered or loose.
Each Use Tighten any loose bolts.
st
After 1 50hrs, Change pump oil. See pump oil change instructions on next
page.
What to Do
10