Table of Contents
Advertisement
Note
The communication speed setting should be the same
between the connected camera with the VISCA RS-422
connector and the remote controller. The connection is
not recognized. After changing the communication
speed, turn on the power of the remote controller, and
prepare the operation.
For details, see "Operation Using the Remote
Controller" - "Preparation" on page 47.
OK/Cancel
See "Buttons common to every menu" on page 19.
44
Setting of the Transmission — Streaming Menu
Setting of the
Transmission
Menu
When you click
Streaming
the Streaming menu appears.
Use this menu to set the items for the transmission by
unicast or multicast.
The Streaming menu consists of the Streaming tab.
Streaming Tab
Unicast streaming
Specify the transmission port numbers of the H.264
video data and audio data to be used when Unicast is
selected from the Connection drop-down list in the
Other panel on the live viewer.
— Streaming
in the Administrator menu,
Advertisement
Table of Contents
