Software Upgrading, Error Code And Panel Code - Philips 24PHG4032 Service Manual

5. Software Upgrading, Error code and Panel Code

5.1 Software Upgrading
5.1.1. The following update is for .bin file.
1. Rename the file to "Usb_update.bin"
2. Prepare a USB memory.
3. Copy the software to USB flash disk(root directory).
4. Switch off the TV and Insert the USB memory stick that contains the software update files in one of the TV's USB 2.0 ports.
5. Switch on the TV. The TV will detect the USB memory s tick automatically. Then a window jumps out as below
6. When the TV software is updated, the TV will turn on again automatically. Remove your USB flash drive.
7. We can enter in CSM or Factory mode to check the current software version.
Step 3: Check the SW version
1. After burning software, TV will restart
2. Press "Menu+1999+back", enter Factory mode to check if the software version is correct
Caution: Please make sure that software upgrade is finished before unplug the USB and AC power!