If The Current Clamp Does Not Work; Service And Parts - Fluke i1010 Instruction Sheet

sales@GlobalTestSupply.com

If the Current Clamp Does Not Work

Check Correct
Battery = OK?
Voltmeter connections?
Voltmeter function/range?
Storage
During longer periods of non-use (> 60 days), remove and
store the battery separately.
Cleaning
Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.

Service and Parts

The Current Clamp should be serviced only by a qualified
service technician. For service information, contact your
nearest Fluke dealer or service center.
Symbols
,
May be used on HAZARDOUS LIVE conductors.
Equipment protected by double or reinforced insulation.
T
W
Risk of Danger. Important information. See Instruction
Sheet.
X
Risk of Electric Shock.
)
Complies with U.S. and Canadian standards: UL61010-1;
CAN/CSA C22.2 No. 61010-1 (2004) & No. 61010-2-032
(2004)
s
Inspected and licensed by TÜV Product Services.
;
Conforms to relevant Australian standards.
N10140
P
Conforms to IEC 61010-1 2nd Edition & IEC 61010-02-032
J
Earth ground
B
AC (Alternating Current)
F
DC (Direct Current)
Fluke-Direct
I410/i1010
English
Panel 6
Refer to "Testing the Battery."
Red to + or V
Black to C
mV dc
mV ac (or V ac)
.com
1.888.610.7664