Assembly; Blower; Vacuum/Shred 'N' Vac - Echo SHRED N VAC ES-231 Operator's Manual

A
SSEMBLY
WARNING
Never perform maintenance or assembly procedures with engine
running, or serious personal injury may result.
BLOWER APPLICATION
Install Blower Pipes
1. Align grooves in straight pipe with pegs on blower housing and
slide pipe onto housing.
2. Turn straight pipe clockwise to lock into place.
3. Align grooves in fan head nozzle with pegs on straight pipe and
slide fan head nozzle onto straight pipe.
4. Turn fan head nozzle clockwise to lock into place.
/
VACUUM SHREDDING APPLICATION
Install Vacuum Tube and Bag Assembly
1. Turn knob (A) counter clockwise until hinged housing cover is free
to open for vacuum tube installation.
2. Loosen screw (B). Do not remove clamp from blower housing.
3. While holding housing cover open, align arrow on vacuum tube with
interlock switch (D), and install vacuum tube into blower housing.
Secure vacuum tube with clamp (B). Clamp fits under slotted guides
(C).
DANGER
S 'N' V
HRED
O ' M
PERATOR S ANUAL
A
C
B
D
C
®
AC
9