Other Features; Automatic Store; Reset (Settings Initialization) - Hitachi CMP307XE User Manual

All manuals and user guides at all-guides.com

OTHER FEATURES

Automatic Store

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the
table below.
Item
Sound volume
Sound balance
Treble
Bass
Mute volume
Input status automatic display
Halftone
Enlargement
Input select
Brightness
Contrast
Gamma correction
Input signal level
Display area
Horizonal position
Vertical position
Dot clock frquency
Dot clock phase
The previously recorded items will be lost.
The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals
with which all the elements are the same or similar will be handled as the same signal.
RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode. Because of this, when the
contents are recorded with RGB1 (or RGB2), there may be loss of adjustment during RGB2 (or RGB1) reception in the
same signal mode.

Reset (Settings Initialization)

The EasyMenu shown to the right will be displayed when the SELECT button is used to select
DISPLAY and moreover DISPLAY INT is selected from the On-screen Display System EasyMenu
during RGB1/RGB2 input. If the
the user adjustment values in the table below for the signal
currently being received will be deleted and the factory settings
will be restored.
Pressing the key (select NO) cancels deletion and returns the
DISPLAY menu.
DISPLAY menu item
20
Display Registration condition
VOLUME
BALANCE
TREBLE
BASS
MUTE LEVEL One set can be recorded.
AUTO FREQ.
HALFTONE
INTERPOLATION
INPUT SELECT
BRIGHTINES
CONTRAST
GAMMA One set can be recorded.
VIDEO LEVEL
DISPLAY AREA
H.POSITION
One group can be recorded for
V.POSITION
CLOCK
each signal mode.
PHASE
key (select YES) of the SELECT button is pressed at this time,
Display
H.POSITION H.POSITION
V.POSITION V.POSITION
CLOCK CLOCK
PHASE PHASE
Reproduction condition
During normal signal
reception.
During normal signal
reception.
During recording and
when the same signal
mode is detected.
16
INITIALIZE？
YES NO