Table of Contents
Advertisement
5-3-3-1 DDR4 Common Options
Parameter
DDR4 Common Options
Enforce POR
DRAM Controller Configuration Press [Enter] to configure DRAM Controller Configuration.
CAD Bus Configuration
Data Bus Configuration
Common RAS
Security
Phy Configuration
Description
Press [Enter] to configure the Plan of Record (POR) to enable / disable
restrictions for DDR4 frequency and voltage programming. Memory speeds
will be capped at AMD guidelines.
Note: To enable 2 DIMMs per Channel at 3200MHz function, select
[Accept] at warning message, change Overclock from [Auto] to
[Enabled], and then set memory speed to 3200MHz.
Press [Enter] to configure CAD Bus Configuration.
Press [Enter] to configure Data Bus Configuration.
Press [Enter] to configure Common RAS.
Press [Enter] to configure Security.
Press [Enter] to configure Security.
- 105 -
BIOS Setup
Advertisement
Table of Contents
