Table of Contents
Advertisement
5-3-3-4 Memory MBIST
Parameter
Memory MBIST
MBIST Enable
MBIST Test Mode
(Note)
MBIST Aggressors
(Note)
MBIST Per Bit Slave Die
Reporting
(Note)
Data Eye
Memory Healing BIST
This item appears when MBIST Enable is set to Enabled.
(Note)
Description
Enable/Disable the Memory MBIST function.
Options available: Enabled/Disabled. Default setting is Disabled.
Selects MBIST Test Mode.
Interface Mode: Tests Single and Multiple CS transactions and Basic
Connectivity.
Data Eye Mode: Measures Voltage vs. Timing.
Options available: Auto, Both, Interface Mode, Data Eye Mode. Default
setting is Auto.
Enable/Disable MBIST Aggressor test.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enable/Disable to report 2D data eye results in ABL log for each DQ,
Chipselect, and Channel.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Press [Enter] to configure advanced items.
Enable/Disable memory healing BIST.
Options available: Auto, Enabled, Disabled. Default setting is Disabled.
- 115 -
BIOS Setup
Advertisement
Table of Contents
