Canon PIXMA MX310 series Quick Start Manual page 19

2
Prepare to load paper.
(1) Open the Rear Tray and pull out the Paper
Support.
Put your finger in the rounded indent of the
Paper Support and pull it out until it stops.
(2) Open the Paper Output Tray.
Put your finger in the rounded indent beside
the Paper Output Tray and open it gently.
(3) Open the Output Tray Extension.
Open up and set the Output Tray Extension
completely by pressing down the hollow on its
front side.
(4) Adjust the position of the Paper Thickness Lever.
Set it to the right when printing on envelopes or T-shirt transfers, and left when printing on
any other type of paper. See "Paper Handling" on page 12.
Note
If the corners or edges of the paper are smudged, try to print with the Paper Thickness Lever
set to the right. It may improve print quality.
Reset the Paper Thickness Lever to the left when you finish printing.
For details on the Paper Thickness Lever, refer to "Inside" in "Main Components" of the User's
Guide on-screen manual.
3
Load the paper.
(1) Load the paper in the Rear Tray with the print
side facing UP.
(2) Align the paper stack against the right side of
the Rear Tray.
(3) Pinch the Paper Guide and slide it against the
left side of the paper stack.
4
Specify the page size and media type settings according to the loaded paper.
Note
When performing copy direct printing without using a computer, select the size and type of the
loaded paper using the Operation Panel.
For details on settings, see "Changing the Copy Settings" on page 19 or "Changing the Print
Settings" on page 52.
When using the machine connected to a computer, select the size and type of the loaded paper
in Page Size (or Paper Size) and Media Type in the printer driver.
For details on printer driver settings, see "Printing with Windows" on page 22 or "Printing with
Macintosh" on page 23.
(4)
(3)
(3)
* Do not load higher than the Load Limit
Mark (A).
Before Using the Machine
(1)
(2)
(1)
(A)
(2)
15