Table of Contents
Advertisement
End or leave a conference call
To end the call for all headsets, press the Call
button on the primary headset, or dock the
primary headset in the base.
Additional headsets can leave the conference
by pressing the Call button on the headset, or
by docking the additional headset in the
primary headset's base (not the additional
headset's base). The conference call will
continue for all other headsets.
Permanent conference mode
By
default,
the
conference
automatically for all additional headsets when
the call ends.
It is possible to continue the conference with
the additional headsets until the primary
headset is docked, by changing this setting in
Jabra Direct.
will
end
37
7.4 Transfer a call from desk phone to
headset
To transfer a call:
1. Select the desk phone as the target phone
on the base.
2. Lift the headset from the base, or tap the
Call button on the headset. If necessary,
press the headset button on the desk phone.
The audio will transfer from the desk phone
handset to the headset.
Do not hang up the desk phone handset until
the call is finished.
38
Advertisement
Table of Contents
