Table of Contents
Advertisement
SETTING TIME OF DAY
When your oven is plugged in for the first time or
when power resumes after a power interruption,
the numbers in the display reset to 0.
To set time of day:
1. Touch STOP/CLEAR.
2. Touch CLOCK.
3. Enter the time by using the number key pads.
Example: To set 3:15, touch number key
pads [3], [1], and [5].
4. Touch CLOCK.
The clock starts counting.
TOUCH KEY SEQUENCE
NOTE:
If the clock (or display) shows any abnormality,
unplug the oven from the AC outlet, plug it back
in and then reset the clock.
TIMED COOKING
Many foods need slower cooking (at less than HI
p
ower) in order to give you the best results.
In addition to HI-POWER, there are 10 multi-
power settings.
EXAMPLE: If you want to cook food on 80%
Power(Power 8) for 5 minutes 30 seconds.
1. Touch STOP/CLEAR.
2. Touch TIME. Display shows 0.
3. Enter 5 minutes 30 seconds by touching [5],
[3], and [0].
4. Touch POWER.
P-HI appears in the display.
This is to tell you that the oven is set on HI
unless a different power setting is chosen.
5. Touch [8] to select power level 8.
6. Touch START.
Two short and one long tone sound and the
word End shows in the display window when
the cooking time is over. Then the oven shuts
itself off.
OPERATING INSTRUCTIONS
TOUCH KEY SEQUENCE
NOTE :
If you do not select the power level, the oven will
operate at power HIGH. To set HI-POWER
cooking, skip steps 4, 5 above.
2 STAGE OR 3 STAGE TIMED
COOKING
For Two or Three Stage cooking, repeat above
step 2 through 5 before touching the START pad
for every additional Time and Power program
you want to add.
- 10 -
Advertisement
Table of Contents
