Page 1
WiFi Hidden Security Camera USER MANUAL FCC ID: 2AYUS-K231...
Page 2
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. For more products please visit www.brookstone.com...
PRODUCT CONFIGURATION Plug Lens USB port Camera face plate is detachable Micro SD Card Slot Indicator LED Reset button Items included in package: Hidden Security Camera, 2 Detachable Face Plates, and User Manual.
REGISTRATION AND LOGIN 1. Run the “Brookstone Smart” app from your smart phone. 2. Register and login. * Screenshots may slightly differ from actual app.
PUSH NOTIFICATIONS You can turn on/off notifications for all devices connected to app by clicking on the “Me” button at the bottom right of the screen. 2. Then click on ”Settings” button. From there you can turn on/off all notifications. 3.
REMOVE A DEVICE From the home screen, click on the device you would like to remove. 2. Then click on the edit symbol on the top right of the screen. 3. From there you would then click the “Remove Device” button at the bottom of the screen.
Page 10
ADD THE DEVICE 1. Make sure phone is connected to your Wi-Fi network and that it is a 2.4GHz network. 2. Remove face plate and plug Hidden Camera into the wall and wait about 75-90 seconds for blue light to flash rapidly to begin set up process. If light is not, press and hold reset button for 5 seconds and then release and wait about 75-90 seconds for light to start blinking rapidly.
Page 11
4. Press the “next step” button 5. Make sure phone is connected to the Wi-Fi network that the device will be connected to. Enter your password for the Wi-Fi network. 6. Follow the directions in the app and hold the QR code on the screen in front of the view of the camera.
Page 12
7. Connecting process will begin. Do not turn off Hidden Camera or phone while connecting. Wait for connection process to complete. 8. Once device has been successfully added, name the device what you would like it to be called in the app.
APP FUNCTIONS Live Video To view live video simply click on the device under “All devices” and you will see your live video at the top immediately. Hit the full screen button in the bottom right corner of the live video to see your live footage at full screen on your phone.
Video Recording To manually record video clips press the “record” button one the main camera screen. To end recording, press “record” button again. To view recordings, press the “Photo Album” button. All of the video recordings and photos you take will be here in the photo album.
Motion Detection The camera uses infrared sensors when someone/something appears within its detection area. Push notifications will be sent your phone once motion is detected. To access control of motion detection press the camera setting button at the top right. On the next page you can select “motion detection”.
Page 17
Hub controls (sound, video quality, signal strength) You can control features from the live video feed. There is a volume button that is used to mute and unmute the live feed(This must be set to unmute in order to record sound on manually recorded video clips).
Page 18
Device”. On the next page press “Add Sharing” at the bottom. After that, enter the email on the person’s Brookstone Smart account that you would like to share the camera with. They will get a notification to accept and after that the other person will have access to view your camera through the Brookstone Smart app on their phone.