OUTPut:POLarity
Parameters
Comments
Usage
OUTPut:POLarity?
Parameters
Comments
OUTPut:SHUNt
Chapter 6
OUTPut:POLarity < select >,(@<ch_list>)
channels in <ch_list>.
Parameter
Parameter
Name
Type
select
discrete (string)
ch_list
string
•
If the channels specified do not support this function, an error will be
generated.
•
Related Commands: INPut:POLarity, OUTPut:POLarity?
•
*RST Condition: OUTP:POL NORM for all digital channels
OUTP:POL INV,(@144)
OUTPut:POLarity? (@< channel >)
in <channel>.
Parameter
Parameter
Name
Type
channel
string
•
Channel must specify a single channel
•
Returned Value: returns one of NORM or INV. The type is string.
OUTPut:SHUNt < enable >,(@< ch_list >)
on Strain Bridge Completion SCPs. This can be used for diagnostic purposes and
characterization of bridge response.
sets the polarity on digital output
Range of
Values
NORMal | INVerted
100 - 163
invert output logic sense on channel 44
returns the polarity on the digital output channel
Range of
Values
100 - 163
adds shunt resistance to one leg of bridge
HP E1415 Command Reference
OUTPut
Default
Units
none
none
Default
Units
none
223