Cycle Options Buttons - LG WM2010CW User's Manual & Installation Instructions

CYCLE OPTIONS BUTTONS

Your washing machine features several additional cycle options to customize cycles to meet your individual
needs. Certain buttons also feature a special function (see the following page for details) that can be
activated by pressing and holding that button for 3 seconds.
To Add Cycle Options to a Cycle:
Turn on the washer and turn the cycle
1
selector knob to select the desired cycle.
2
Use the cycle settings buttons to adjust the
settings for that cycle.
3 Press the cycle option button(s) for the
option you would like to add. The cycle
option buttons will light when selected.
4
Press the START/PAUSE button to start the
cycle. The washer will start automatically.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.
BEEPER
Adjusts the end-of-cycle
beeper volume or turns it off.
TUB CLEAN
A buildup of detergent
residue can occur in the
wash tub over time and can
lead to a mildewy or musty
smell. The TUB CLEAN cycle is specially designed
to remove this buildup. Add liquid chlorine bleach
to the bleach Compartment. After the cycle has
ended, open the door and allow the drum interior
to dry completely.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
H O W TO U S E
DELAY WASH
of the wash cycle. Each press of the button
increases the delay time by one hour, up to 9
hours.
RINSE + SPIN
Select this option to rinse
and spin a load separately
from a regular cycle.
This can be helpful in
preventing fresh stains from setting in fabrics.
To activate the Rinse + Spin cycle:
1
Press the ON/OFF button to turn on
the washer.
Press the RINSE + SPIN button.
2
Press the START/PAUSE button.
3
Once you have selected
the cycle and other
settings, press this
button to delay the start