Stanley Fat Max FMC041 Original Instructions Manual

Stanley Fat Max FMC041 Original Instructions Manual

Advertisement

Quick Links

4
1
2
3
6
5
FMC041
www.stanley.eu

Advertisement

Table of Contents
loading

Summary of Contents for Stanley Fat Max FMC041

  • Page 1 FMC041 www.stanley.eu...
  • Page 2 ENGLISH (Original instructions)
  • Page 3: Intended Use

    3. Personal safety a. Stay alert, watch what you are doing and use common Your Stanley Fat Max FMC041 impact driver has been sense when operating a power tool. Do not use a designed for screwdriving and nut setting applications. This...
  • Page 4 ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or Use clamps or another practical way to secure and binding of moving parts, breakage of parts and any support the workpiece to a stable platform. Holding the other condition that may affect the power tools work by hand or against your body leaves it unstable and operation.
  • Page 5 Fitting and removing a screwdriver bit or Chargers socket(fig. C) Use your Stanley Fat Max charger only to charge the bat- This tool is fitted with a quick release chuck to allow for an tery in the tool with which it was supplied. Other batteries easy exchange of bits.
  • Page 6: Maintenance

    Maintenance LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged. Your Stanley Fat Max tool has been designed to operate over a long period of time with a minimum of maintenance. Charger diagnostics Continuous satisfactory operation depends upon proper tool If the charger detects a weak or damaged battery, the care and regular cleaning.
  • Page 7: Ec Declaration Of Conformity

    Voltage 10.8 repair agent can be obtained on the Internet at www.2helpU. Capacity com, or by contacting your local Stanley Fat Max office at the Type Li-Ion address indicated in this manual. Level of sound pressure according to EN 60745: Please visit our website www.blackanddecker.co.uk to register...
  • Page 8 United Kingdom Stanley Fat Max Tel. 01753 511234 210 Bath Road Fax 01753 572112 Slough, Berkshire SL1 3YD www.stanleytools.co.uk 90639577 REV-0 06/2016...

This manual is also suitable for:

Fat max fmc041s2

Table of Contents