Sony MHC-V50 Service Manual page 6

MHC-V50/V50D
NOTE OF REPLACING MOTHERBOARD BOARD OR
BLUETOOTH MODULE OR RC-S730 (WW) BOARD
When the MOTHERBOARD board or BLUETOOTH module or
RC-S730 (WW) board are replaced, please execute the below
service mode.
Pairing this system with a Bluetooth device
1. Press the [ ] button to turn the power on.
1
2. Place the Bluetooth device within 1 meter (3 feet) from the
system.
3. Touch BLUETOOTH on the unit to select Bluetooth function.
"BT AUDIO" appears on the display.
Hint
• When there is no pairing information on the system, "PAIR-
ING" fl ashes on the display and the system enters the pairing
mode. Proceed to step 5.
• If the system is connected to a BLUETOOTH device, touch
BLUETOOTH on the unit to disconnect the BLUETOOTH
device.
4. Touch and hold PAIRING on the unit for 2 seconds or more.
"PAIRING" fl ashes in the display panel.
5. Perform the pairing procedure on the Bluetooth device.
6. Select model's name on the display of the Bluetooth device.
For example, select "MHC-V50 or MHC-V50D". If passkey
is required on the Bluetooth device, enter "0000".
7. Perform the Bluetooth connection on the Bluetooth device.
8. When pairing is completed and the Bluetooth connection
is established, the Bluetooth device name appears on the
display.
9. To cancel pairing operation, touch and hold
the unit for 2 seconds or more until "BT AUDIO" appears on
the display.
Connecting with a smartphone by one touch (NFC)
Note: The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
1. Press the [ ] button to turn the power on.
1
2. Download and install the app "NFC Easy Connect".
Download the free Android app from Google Play by searching
for "NFC Easy Connect".
3. Start the app "NFC Easy Connect" on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name appears on the display.
6
Playing music from a Bluetooth device
For a Bluetooth device
1. Press the [
2. Touch BLUETOOTH on the unit to select Bluetooth function.
"BT AUDIO" appears on the display.
3. Establish connection with the Bluetooth device.
Touch BLUETOOTH on the unit to connect to the last
connected Bluetooth device.
Perform the Bluetooth connection from the Bluetooth device if
the device is not connected.
Once the connection is established, the Bluetooth device name
appears on the display.
4. Touch N.
Depending on the Bluetooth device,
– you may have to touch N twice.
– you may need to start playback of an audio source on the
Bluetooth device.
For an NFC-compatible smartphone
1. Press the [
Touch the smartphone to the N-Mark on the system to establish
the Bluetooth connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the Bluetooth device
For a Bluetooth device
PAIRING on
Touch BLUETOOTH on the unit.
"BT AUDIO" appears on the display.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
BLUETOOTH PAIRING HISTORY CLEAR test mode
(Refer page 24).
] button to turn the power on.
1
] button to turn the power on.
1