JVC KD-DV7304 Instructions Manual page 41

Indication
HPF
High pass filter
EXT IN *
3
External input
TAG DISP
Tag display
VIDEO *
4
Video format
REAR SPK *
5
Rear speaker output
AMP GAIN
Amplifier gain control
IF BAND
Intermediate
frequency band
*
3 Displayed only when one of the following sources is selected—FM, AM, DISC, USB, Bluetooth, or LINE IN.
* 4 The newly selected video format takes effect only after you turn on the power again or change the source.
*
5 Displayed only when Dual Zone is activated (see page 28).
Item Setting, [reference page]
( : Initial)
• HPF ON : The cut-off frequency is chosen automatically according to the
WOOFER setting (LOW/MID/HIGH) so that you can enjoy the bass
sound purely from the subwoofer if it is connected.
• HPF OFF : Cancels.
• CHANGER : To use a JVC CD changer, [34], or an Apple iPod/a JVC D. player, [35].
• EXT IN : To use any other external component, [36].
• TAG ON : Shows the tag while playing MP3/WMA/WAV tracks.
• TAG OFF : Cancels.
• PAL : Select this if your monitor is of the PAL color system.
• NTSC : Select this if your monitor is of the NTSC color system.
• ON : Select this to turn on the rear speaker output.
• OFF : Cancels.
• LOW PWR : VOL 00 – VOL 30 (Select if the maximum power of each speaker is less
than 50 W to prevent damaging the speaker.)
• HIGH PWR : VOL 00 – VOL 50
• AUTO : Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
• WIDE : Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
SETTINGS 41