Related Manuals for JVC KD-DV7304
Summary of Contents for JVC KD-DV7304
- Page 1 DVD/CD RECEIVER KD-DV7304 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0450-001A [UI]...
- Page 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
- Page 3 WARNINGS: How to reset your unit To prevent accidents and damage • DO NOT install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags. –...
- Page 4 Detaching the control panel Attaching the control panel Lever CAUTION: The lever comes out if you pressed the button while the panel is detached. If this happens, push the lever back into lock position before attaching the panel. For safety... Temperature inside the car...
-
Page 5: Table Of Contents
CONTENTS INTRODUCTIONS Playable disc type ....................Preparation ....................... OPERATIONS Basic operations ....................• Using the control panel ................. • Using the remote controller (RM-RK241) ............Listening to the radio ..................12 Disc operations ....................13 Listening to the USB device .................. 26 Dual Zone operations .................. -
Page 6: Playable Disc Type
Playable disc type Disc type Recording format, file type, etc Playable DVD-Video (Region Code numbers include “5”) * DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R * /-RW, +R/+RW * DVD-VR (non-CPRM only) • DVD Video: UDF bridge • DVD-VR: UDF 201 DivX/MPEG-1/MPEG-2 Video •... -
Page 7: Preparation
Preparation Cancel the display demonstration and set the clock • See also page 40. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ Enter the PSM settings. -
Page 8: Basic Operations
Basic operations Using the control panel Select the source. Enter functions mode. FM/AM DISC * CD-CH */IPOD */ Press M MODE, then one of the following buttons D.PLAYER * (or EXT IN) BT-PHONE (Bluetooth (within 5 seconds)... Phone) * BT-AUDIO (Bluetooth Audio) * : Turn on/off monaural reception. -
Page 9: Using The Remote Controller (Rm-Rk241)
Display window Playback source indicators Dual Zone indicator Loudness indicator Main display (Time, menu, playback information) Track information indicators Track indicator Sound mode indicators • lights up for the selected item. Source display/Preset No./Track No./Folder No./ Disc No./Chapter No. Tuner reception indicators Status of Bluetooth device Playback mode/item indicators (Device number, [1 –... - Page 10 EXTRA MONITOR Warning: Monitor control buttons To prevent accidents and damage • Used for a JVC monitor—KV-MR9010, • Do not install any battery other than CR2025 or its KV-MH6510, KV-M706, or KV-M705. equivalent. • Do not leave the remote controller in a place...
- Page 11 • : Reverse skip/forward skip (for – DISC/USB: Selects chapter/title/folder/track after audio operation). entering search mode by pressing SHIFT For Apple iPod/JVC D. player operations: and DIRECT. ∞ • : Pauses/stops or resumes playback. – BT-PHONE: Dials preset phone number (1 – 6).
-
Page 12: Listening To The Radio
Listening to the radio Select preset station. Change the display information Lights up when receiving an FM stereo Select “FM/AM.” broadcast with sufficient signal strength. Ÿ Select the bands. Search for a station to listen—Auto Search. Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly. * If no name is assigned to a station, “NO NAME”... -
Page 13: Disc Operations
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control the playback by referring to the monitor screen. (See pages 21 – 25.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). - Page 14 Operations using the control panel During stop: Locate title Select title During play/pause: Locate chapter Elapsed playing time Clock Current title Press: Select chapter and chapter number (back to the beginning) Hold: Reverse/fast-forward chapter * During stop: Locate program Select program number/ During play/pause: Locate chapter playlist number Elapsed playing time...
- Page 15 Locate particular folder directly Select folder Elapsed playing time Clock Folder number Press: Select track Track title (back to the beginning) Hold: Reverse/fast-forward track * Locate particular track directly (PBC not in use) Elapsed playing time and Current track number Press: Select track Clock and Current track number (back to the...
- Page 16 Locate particular folder directly Select folder Elapsed playing time and Current track number Press: Select track Clock and Current track number Album Hold: Reverse/fast-forward track * name/performer (folder name * Track title (file name * (back to the beginning) Locate particular track directly Elapsed playing time and Current track number Press: Select track Clock and Current track number...
- Page 17 After pressing , press the following buttons to... Disc type Skip 10 chapters * CHP RPT: Repeat current chapter — TIT RPT: Repeat current title Skip 10 chapters * CHP RPT: Repeat current chapter PRG RPT: Repeat current — program (not available for Playlist playback) Skip 10 tracks (within the...
- Page 18 Operations using the remote controller—RM-RK241 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play : Reverse/forward chapter search * • Slow motion * during pause. No sound can be heard. : Press: Select chapter * Hold: Reverse/fast-forward chapter search * : Select title : Select audio language...
- Page 19 : Stop play To search for chapter/program/ : Pause (Frame by frame playback if playlist directly pressed during pause.) Select chapter/program/playlist : Start play search. : Reverse/forward chapter search * • Forward slow motion * during pause. No sound can be heard. (Reverse slow motion does not work.) Enter the desired number.
- Page 20 To select track directly : Stop play • For VCD with PBC, a list of items is : Pause (Frame by frame playback if shown on the disc menu. pressed during pause.) : Start play : Reverse/forward track search * Enter the desired number.
- Page 21 Enlarging the view—Zoom in (DVD/DVD-VR/DivX/MPEG Video/VCD) During play or pause... While holding , press repeatedly. Move the enlarged portion. • To cancel zoom, select “ZOOM OFF.” Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 22).
- Page 22 On-screen bar Ex.: DVD-Video Information Operation Playback status Disc type • DVD-Video/DVD-VR/DTS-CD: Audio signal Play format type and channel Forward/reverse search Forward/reverse slow-motion • VCD: Playback mode * Pause DVD-Video: T. RPT: Title repeat Stop Operation icons C. RPT: Chapter repeat DVD-VR: C.
- Page 23 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear during play. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
- Page 24 Mode Playback functions F. RPT (folder repeat): Repeat current folder T. RPT (track repeat): Repeat current track F. INT (folder intro): Plays the beginning 15 seconds of first tracks of all folders of the current disc T. INT (track intro): Plays the beginning 15 seconds of all tracks of the current disc A.
- Page 25 List screen for DVD-VR You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. Select a list screen. Select an item from the list. Program/playlist number Recording date Recording source (TV station, the input terminal of the recording equipment, etc.) Start time of recording Title of the program/playlist * Current selection (highlighted bar)
-
Page 26: Listening To The Usb Device
Listening to the USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player (USB mass storage class device), portable HDD, etc. to the unit. Attaching a USB memory USB input terminal USB memory This unit can play DivX/MPEG Video/MP3/WMA/WAV tracks stored in a USB device. - Page 27 Cautions: • Avoid using the USB device if it might hinder your safety driving. • Do not pull out and attach the USB device repeatedly while “READING” is flashing on the display. • Do not start the car engine if a USB device is connected. •...
-
Page 28: Dual Zone Operations
Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You cannot select “AM” or “USB” as the source when Dual Zone is activated. •... -
Page 29: External Devices
Using the Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. See also page 37. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. •... - Page 30 Select a device you want to connect. Use the Bluetooth device to search and connect. On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECT” Use “OPEN” or “SEARCH” to connect. appears on the display.
-
Page 31: Using The Bluetooth Cellular Phone
Using the Bluetooth cellular phone Change the display information Select “BT-PHONE.” Ÿ Enter Bluetooth menu. Make a call or setting using the Bluetooth setting menu. (See pages 32 and 44.) When a call comes in..When a text message comes in..The source is automatically changed to “BT-PHONE.”... - Page 32 Making a call You can make a call using the following methods. Select “BT-PHONE,” then follow the following steps to make a call: (unless mentioned otherwise) Call history Display the Dial Select a call history. Select a name (if it is acquired) or Menu.
-
Page 33: Using The Bluetooth Audio Player
If playback did not start automatically, operate the Bluetooth audio player to start playback. • Refer also to page 30 for connecting/disconnecting/deleting a registered device. Bluetooth Information: If you wish to receive more information about Bluetooth, visit our JVC web site. EXTERNAL DEVICES... -
Page 34: Listening To The Cd Changer
Listening to the CD changer Change the display information (see page 16) It is recommended to use a JVC MP3-compatible CD After pressing , press the following buttons changer with your unit. You can connect a CD changer to... to the CD changer jack on the rear of the unit. See also Skip 10 tracks page 37. -
Page 35: Listening To The Ipod / D. Player
Listening to the iPod / D. player Change the display information Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of the unit. See also page 37. • Interface adapter for iPod—KS-PD100 for controlling an iPod. •... -
Page 36: Listening To The Other External Components
After pressing , press the following buttons to... ONE RPT: Functions the same as “Repeat One” of the iPod or “Repeat Mode One” of the D. player. ALL RPT: Functions the same as “Repeat All” of the iPod or “Repeat Mode All”... - Page 37 LINE IN terminals MD player, etc., [36] (see page 41 of the MD player, etc., [36] ”EXT IN” setting) JVC CD changer, [34] with or without Apple iPod, [35] (see pages 29 – 33) (see page 41 of the ”EXT IN” setting) JVC D.
-
Page 38: Selecting A Preset Sound Mode
Selecting a preset sound mode Preset frequency level settings: Preset equalizing values Sound mode 60 Hz 150 Hz 400 Hz 1 kHz 2.5 kHz 6.3 kHz 15 kHz USER ROCK CLASSIC POPS HIP HOP –01 –02 JAZZ Storing your own sound adjustments Adjust the level. -
Page 39: General Settings - Psm
Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table on pages 40 and 41. Adjust the level. Enter the PSM settings. Select a PSM item. FAD * (fader) R06 to F06 Adjust the front and rear speaker balance. - Page 40 Indication Item Setting, [reference page] : Initial) DEMO • DEMO ON : Display demonstration will be activated automatically if no operation Display demonstration is done for about 20 seconds, [7]. • DEMO OFF : Cancels. CLK DISP * • ON : Clock time is shown on the display at all times when the power is Clock display turned off.
- Page 41 • HPF OFF : Cancels. EXT IN * • CHANGER : To use a JVC CD changer, [34], or an Apple iPod/a JVC D. player, [35]. External input • EXT IN : To use any other external component, [36]. TAG DISP •...
-
Page 42: Setup Menu
Setup menu These operations are possible on the monitor using the remote controller. Enter the setup menu while stop. Ÿ Select a menu. Select an item you want to set • To cancel pop-up menu, press ⁄ Select an option. To return to normal screen Menu Item... - Page 43 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE (DISC) Select the file type to play.
-
Page 44: Bluetooth Settings
Bluetooth settings You can change the settings listed on the right column Setting menu : Initial) according to your preference. AUTO CNT (connect) When the unit is turned on, the connection is Select “BT-PHONE” or “BT-AUDIO.” established automatically with..OFF: No Bluetooth device. -
Page 45: Assigning Titles
Assigning titles You can assign titles to 30 station frequencies (FM and To erase the entire title AM) and up to 8 characters for each title. In step Ÿ on the left... Select FM/AM. Ÿ Show the title entry screen. Assign a title. -
Page 46: Maintenance
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the connectors. A dirty disc may not play correctly. To minimize this possibility, periodically wipe the If a disc does become dirty, wipe it with connectors with a cotton swab or cloth moistened with a soft cloth in a straight line from center alcohol, being careful not to damage the connectors. -
Page 47: More About This Unit
More about this unit • While playing from a USB device, the playback order General may differ from other players. Turning on the power • This unit is compatible with the USB Full-Speed. • By pressing SRC on the unit, you can also turn on the •... - Page 48 * <.mod> is an extension code used for the MPEG-2 • This unit cannot play back the following files: files recorded by JVC Everio camcorders. – MP3 files encoded with MP3i and MP3 PRO format. • The stream format should conform to MPEG system/ –...
- Page 49 • Some Bluetooth devices may not be connected to operations may not be performed correctly or as this unit depending on the Bluetooth version of the intended. In this case, visit the following JVC web device. site: • This unit may not work for some Bluetooth devices.
- Page 50 Setup menu About sounds reproduced through the rear • When the language you have selected is not recorded terminals on a file, the original language is automatically • Through the analog terminals (Speaker out/ used as the initial language. In addition, the initial LINE OUT/2nd AUDIO OUT): 2-channel signal is languages settings will not work as you set due to emitted.
- Page 51 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 43). Output Signal Playback Disc STREAM/PCM DOLBY PCM ONLY DIGITAL/PCM DVD-Video 48 kHz, 16/20/24 bits 48 kHz, 16 bits stereo Linear PCM * Linear PCM 96 kHz, Linear PCM 48 kHz, 16 bits stereo Linear PCM...
- Page 52 Language codes Code Language Code Language Code Language Code Language Code Language Afar Persian Greenlandic Occitan Sesotho Abkhazian Finnish KM Cambodian OM (Afan) Oromo SU Sundanese Afrikaans Fiji Kannada Oriya SW Swahili AM Ameharic Faroese Korean (KOR) Panjabi Tamil Arabic Frisian Kashmiri Polish...
-
Page 53: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •... - Page 54 Symptom Remedy/Cause • Tracks cannot be played back. • Record the tracks using a compliant application in the appropriate discs (see page 6). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names. •...
- Page 55 Symptom Remedy/Cause • Bluetooth device does not detect the unit. The unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again.
- Page 56 Symptom Remedy/Cause • “NO DISC” appears on the display. Insert a disc into the magazine. • “NO MAG” appears on the display. Insert the magazine. • “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
-
Page 57: Specifications
Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output Front/Rear: 19 W per channel into 4 Ω, 40 Hz to (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω... - Page 58 DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB...
- Page 59 • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners.
- Page 60 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit © 2007 Victor Company of Japan, Limited 0207DTSMDTJEIN...