Sony NW-E503 Service Manual page 4

NW-E503/E505/E507
Adjusting the
current time
setting
(Date-Time)
You can set and display (except in FM tuner)
the current time.
Nx button
1
Press and hold the SEARCH/
MENU button for half a second
while the audio player is stopped
or receiving an FM signal.
The menu screen is displayed.
Repeat Mode
Sound
Volume Mode
4
Shuttle switch
to > to .
SEARCH/
MENU button
2
Rotate the Shuttle switch to select
"Date-Time>" and press the Nx
button to confirm.
The year digit is displayed in [ ].
Y M D
[2005] 01 / 01 15 : 00
3
Rotate the Shuttle switch to adjust
the "year" setting and press the
Nx button to confirm.
The month digit is displayed in [ ].
Y M D
2005 [01]/ 01 15 : 00
4
As you did in step 3, adjust the
settings for "month", "date",
"hour", and "minute".
After rotating the Shuttle switch to
adjust the time and date setting, pressing
the Nx button to confirm.
To cancel the Menu mode
Press the SEARCH/MENU button to return the
screen to the previous stage. Press repeatedly to exit
menu mode.
To display the current time
Press the DISP/FM (Display/FM) button repeatedly
until the "Clock" is displayed (page 26).
Note, however, when the "Clock" is set to off in the
Display Screen menu (page 27), you cannot display
the current time by the procedure above.
Notes
• You cannot change the display mode while using
the FM tuner.
• If the unit is not used for a long time, your
settings for date and time may need to be reset.
• If the current time is not set, the display for the
date and time will show "--".
h m
h m