Ma Board, Nfc Module - Sony CMT-X3CD Service Manual

2-5.

MA BOARD, NFC MODULE

Note 1: When replacing the MA board or the NFC module, be sure
replace both at the same time. The MA board or the NFC mod-
ule cannot replace with single.
1 flexible flat cable (10P)
(XP18)
8 four screws
(5)
9 MA board
5 connector
(XP8)
6 flexible flat cable (8P)
(XP12)
qd NFC module
qs Remove the NFC module in
the direction of the arrow.
2 connector
(XP6)
3 connector
(XP7)
4 flexible flat cable (10P)
(XP17)
7 connector
(XP1)
– Front bottom view –
qa Insert the tweezers in the crevice between
0 connector
(XP11)
Note 2: When installing the flexible flat cable,
ensure that the colored line is parallel
to the connector after insertion.
Insert straight into the interior.
flexible flat
cable
colored line
connector
Insert at a slant.
flexible flat
cable
colored line
connector
the NFC module and the top panel,
and lift the NFC module.
adhesive sheet
tweezers
NFC module
CMT-X3CD
OK
NG
top panel
11