LG F6V1110WTSA Owner's Manual page 45

OPERATION
44
NOTE
• The default settings are configured to
dispense the detergent of Dispenser 1
and the fabric softener of Dispenser 2.
Changing Dispense Level for a Single
Load
1
Press the Power button.
2
Turn the knob to select the desired
cycle.
3
Press the Dispenser 1 or Dispenser 2
button to increase or decrease the
dispensed amount from the set
defaults.
Buttons
Indicator
*1 The default settings are
configured to dispense 42 ml of
detergent and 30 ml of softener for
4-6 kg of normally soiled laundry.
4
Press the Start/Pause button.
Dispensed
*1
Amount
More (110%)
Normal (100%)
Less (90%)
Off (0%)
NOTE
• Use the manufacturer's
recommendations on the detergent or
fabric softener package when setting
the ezDispense amounts for a
standard 4-6 kg load.
• Most cycles will automatically use the
default amounts you have set,
indicated by the Normal LED light on
the Dispenser 1 and Dispenser 2
buttons.
• The Delicates, Sportswear, and Tub
Clean cycles turn the ezDispense
function off by default.
Changing Default Dispense
Amounts
The default settings are configured to
dispense 42 ml of detergent and 30 ml
of softener for 4-6 kg of normally soiled
laundry.
Detergent should be used according to
the instruction of the detergent
manufacturer and selected according to
type, colour, soiling of the fabric and the
washing temperature.
1
Press the Power button.
2
Change default dispense amounts.
• Dispenser 1 : Press and hold the
Dispenser 1 button for 3 seconds.
• Dispenser 2 : Press and hold the
Dispenser 2 button for 3 seconds.
3
Turn the knob to increase or decrease
the amount of detergent or fabric
softener. The amount is shown in the
display.
• The default amounts can be
increased or decreased in 1 ml
increments, within a range of 9 ml