Table of Contents
Advertisement
Installation
If the freezer
compartment door
is lower than the
refrigerator
compartment door
If the freezer
compartment door
is higher than the
refrigerator
compartment door
- first method
If the freezer
compartment door
is higher than the
refrigerator
compartment door
- second method
CAUTION
After leveling the
door height
11
Height adjustment
Level them by inserting a flat ( - type) driver into the groove of the left height adjusting
screw and rotating it clockwise ( ).
Level them by inserting a flat ( - type) driver into the groove of the right height
adjusting screw and rotating it clockwise ( ).
Adjust the level when the refrigerator door is lower than the freezer door during the
use of the refrigerator.
1. Using the wide side of the tool for adjustment
clockwise to loosen the Keeper nut.
2. Using the narrow side of the tool for adjustment, turn the adjustment hinge pin
➁ (
) clockwise or (
freezer door.
3. After setting the level of the door, turn the keeper nut(
tighten.
Do not force too hard to level the height. The hinge pin can be pulled out.
(Adjustable range of height is a maximum of 2" (5 cm))
The refrigerator door will close smoothly by raising the front side by adjusting the
height adjusting screw. If the door does not close properly because it is improperly
adjusted, the performance of the refrigerator will be affected.
Keeper nut
Adjustment
hinge pin
Down
➂, turn the keeper nut ➁ (
) counterclockwise to level the refrigerator and
Tool for
adjustment
Up
)
) counterclockwise to
Advertisement
Table of Contents
