Table of Contents
Advertisement
Attaching the Shoulder Strap
We recommend that you attach the Shoulder
Strap before going out to avoid dropping the
Camcorder.
1
Pull the end of the Shoulder Strap through
the Shoulder Strap Holder
Camcorder.
2
Fold the end of the Shoulder Strap, run it
through the Shoulder Strap Length
Adjuster, and pull it.
≥Pull it out more than 1 inch (2 cm) 1 from the
Shoulder Strap Length Adjuster so that it
cannot slip off.
1
≥Attach the other end of the Shoulder Strap to
the other Shoulder Strap Holder in the same
way.
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
the front and pull down to open the
Cassette Compartment Cover.
2
Insert a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark 1.
1
PUSH
4
Close the Cassette Compartment Cover.
Before Use
ª Accidental Erasure Prevention
Opening the accidental erasure prevention slider
1 on the cassette (by sliding it to the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it to the [REC] arrow
(45)
on the
direction).
(45)
≥For other notes concerning this item, see
Turning on the Camcorder
When the Camcorder is turned on with the Lens
Cap on, the Automatic White Balance Adjustment
may not function properly. Please turn on the
Camcorder after removing the Lens Cap.
ª How to Turn on the Power
1
(37)
toward
ª How to Turn off the Power
1
(37)
Selecting Modes
You can choose a desired mode by rotating the
Mode Dial.
1
Use this mode when recording pictures on a tape.
Use this mode when playing back the recorded
scene on a tape.
-16-
1
R E C
SAVE
Set the [OFF/ON] Switch
pressing the button 1.
≥The [POWER] Lamp
(43)
ON
(42)
(43)
POWER
Set the [OFF/ON] Switch
pressing the button 1.
(42)
Rotate the Mode Dial
(39)
:Tape Recording Mode
:Tape Playback Mode
.
-47-
(42)
to [ON] while
lights up.
1
(42)
to [OFF] while
ON
1
(39)
.
Advertisement
Table of Contents
