Bosch Keo Original Instructions Manual page 13

Technical Data
Sabre saw
Article number
A)
Rated voltage
Stroke rate at no load n
0
Tool holder
Stroke
− in wood
− in soft metal
Weight according to EPTA‑Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation
Battery type
A) Limited performance at temperatures < 0 °C
B) Depends on battery in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-11.
Typically the A-weighted sound pressure level of the product
is 74 dB(A). Uncertainty K = 5 dB. The noise level when
working can exceed the declared values.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-11:
Sawing chipboard with saw blade S 644 D:
2 2
a = 19 m/s , K = 1.5 m/s ,
h,B
Sawing wood beams with saw blade S 644 D:
2 2
a = 20 m/s , K = 1.5 m/s .
h,WB
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).
Bosch Power Tools
V
min
mm
mm
mm
B)
kg
A)
and storage
Mounting and Operation
Action
Delivery scope
Mounting the Hook
Checking if the Hook fits correctly
Inserting/Replacing the Saw Blade
Checking if the Blade is connected
Inserting/removing the battery
Switching on and off/Controlling the
Stroke Rate
Working Advice
Maintenance and cleaning
Selecting accessories
Starting Operation
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Inserting/removing the battery (see figure F)
Note: Using unsuitable batteries can lead to malfunctions of
or cause damage to the power tool.
Insert the charged battery (9). Make sure that the battery is
fully fitted.
To remove the battery (9) from the machine, press the bat-
tery unlocking button (12) and pull the battery out.
3 600 H61 A..
-1
°C
°C
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0 Ah,
5.0 Ah, 6.0 Ah
Figure
A
B
C
D
E
F
G − H
I − J 208 − 209
K
L
F 016 L94 166 | (11.10.2021)
English | 13
Keo
18
0 − 2300
SDS
20
80
7
1.4
0... +35
-20... +50
Page
203
204
205
205
206
206
207
209
210