Disassembly Work-Flow - Canon SmartBase MPC200 Service Manual

2. ASSEMBLY / DISASSEMBLY

2.1 Disassembly Work-Flow

The work-flow for the disassembly of the main units is as follows. In order to replace parts, you need to
confirm which parts have to be removed. Numbers in parentheses indicate the disassembly number.
Main unit
Flatbed ass'y
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
SmartBase MPC200/imageCLASS MPC200
Side cover/Operation panel
SPCNT board ROM replacement
Contact sensor Contact sensor drive motor
Middle cover Printer unit
Paper tray
Power supply unit
ASF unit
Sensor board
Figure 3-2 Disassembly Work-Flow
3-5
Chapter 3: Assembly and Disassembly
PC-CARD unit
Paper feed motor
Carriage unit
Purge unit
Carriage motor
Platen unit
Paper feed roller