Kenwood DDX7017BT Instruction Manual page 72

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting external amplifiers for a 3 way
speaker system
Tweeter preout
Mid range preout
Woofer preout
Speaker
RCA cable (not supplied)
*
* When connecting to an external amplifier, connect its ground wire
to the car's chassis.
72
❏ Connecting microphone for Bluetooth
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
7