Kenwood DDX7017BT Instruction Manual page 69

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
❏ Connecting wires to terminals for DDX717WBT/DDX717WBTM (for Toyota Cars)
See page 71.
See page 72.
10 A fuse
See page 71.
See page 71.
1
Blue with white stripe
(Power control wire)
(12 V 200 mA)
Brown (Mute control wire)
FRONT VIEW CAMERA
REAR VIEW CAMERA
VIDEO OUT
1
*
Connect to power control terminal when
using the optional power amplifier.
Not used.
Connector B
Connect to the vehicle's harness.
Connector A
Connect to the vehicle's
harness.
* 1
* 2
Connect the antenna cord
to the antenna terminal.
Purple with white stripe (Reverse sensor wire)
Light green (Parking sensor wire)
USB terminal (1.0 m): See page 70.
See page 71.
See page 71.
See page 71.
Connector D
6
Connect to the vehicle's steering remote harness.
D22
• Depending on the type of vehicle, it cannot be connected.
D21 D23
Pin
A1 Orange/White
A2 Yellow
A4 Red
A5 Blue
A6 Black
White ª / White/Black ·
A8/A7
Gray ª / Gray/Black ·
A10/A9
Green ª / Green/Black ·
B2/B1
Purple ª / Purple/Black ·
B6/B5
D21 White
D22 Red
D23 Black
If no connections are made, do not let the cable come out from the tab.
For 3 way speaker system connection, see also page 72.
Connect to the vehicle's reverse lamp
harness when using the optional rear
view camera.
Connect to the
3
vehicle's parking
brake detection switch
harness.
• For best safety, be
sure to connect the
parking sensor.
Color and functions of Connector A, B and D
Dimmer
Battery
Ignition (ACC)
Antenna control (12 V
Ground connection
Left speaker (front/mid range)*
Right speaker (front/mid range)*
Left speaker (rear/tweeter)*
Right speaker (rear/tweeter)*
Input 1
Input 2
Ground
300 mA)
2
2
2
2
ENGLISH 69