Entertainment; Network Connection; Connecting To A Wired Network - LG 55LW9800 Owner's Manual

ENTERTAINMENT

Network Connection

Connecting to a wired network

Connect the TV to a local area network (LAN) via
the LAN port as shown in the following illustration
and set up the network settings.
If wired and wireless networks are both available,
wired is the preferred method.
After making a physical connection, a small number
of home networks may require the TV network
settings to be adjusted. For most home networks,
the TV will connect to automatically without any
adjustments.
For detail information, contact your internet
provider or router manual.
Do not connect a modular phone cable to
the LAN port.
Since there are various connection
methods, please follow the specifications of
your telecommunication carrier or internet
service provider.
After connecting the LAN port, use the
Premium or LG Apps menu.
To set up the network settings: (Even if your TV has
already connected automatically, running setup
again will not harm anything)
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to SETUP
and press ENTER.
3
Press the Navigation buttons to scroll to
NETWORK and press ENTER.
4
Press the Navigation buttons to select Network
Setting and press ENTER.
5
If wired and wireless are simultaneously
connected, press the Navigation buttons to
select Wired and press ENTER.
6
If you have already set the Network Setting,
select Resetting. The new connection settings
will reset the current network settings.
7
Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses
will need to be input manually.
- IP Auto Setting: Select this if there is a DHCP
server (Router) on the local area network
(LAN) via wired connection, the TV will
automatically be allocated an IP address. If
you re using a broadband router or broadband
modem that has a DHCP (Dynamic Host
Configuration Protocol) server function. The IP
address will automatically be determined.
- IP Manual Setting: Select if there is no DHCP
server on the network or you want to set the
IP address manually.
8
When you are finished, press EXIT.