LG 55LW9800 Owner's Manual page 137

14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to Real data mapping .
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to Real data mapping .
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to Real data mapping .
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. 3D (Command: x t) (For 3D TV)
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data01] [ ][Data02][ ]
[Data03][ ][Data04][Cr]
Data1
00: 3D On
02: 3D to 2D
Data2
00: Top and Bottom
02: Check Board
Data3
00: Right to Left
Data4
3D Depth: Min : 00 ~ Max : 14
(*transmit by Hexadecimal code)
*
If data1 is 00 (3D On), data4 has no meaning.
*
If data1 is 01 (3D off) or 02 (3D to 2D), data2, data3
and data4 have no meaning.
*
If data1 is 03 (2D to 3D), data2 and data3 have no
meaning.
Data 1 Data 2
00
01 x
02 x
03 x
x : Don t care
Acknowledgement [t][ ][OK][Data01][Data02]
[Data03][Data04][x][t][ ][NG][Data01][x]
18. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust color temperature in the
PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to Real data mapping .
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
19. Extended 3D (Command: x v) (For 3D TV)
01: 3D Off
03: 2D to 3D
01: Side by Side
03: Frame Sequential
01: Left to Right
Data 3 Data 4
x
x x
x x
x
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr]
Data1: 3D option
00: 3D Picture Correction
01: 3D Depth (2D to 3D Only)
02: 3D Viewpoint
03: 3D Picture Size
04: 3D Picture Balance
05: 3D Optimization
Data2: It has own range for each 3D option
determined by Data1.
1)
When Data1 is 00
00: Right to Left
2)
When Data1 is 01
Data Min: 00 ~ Max: 14 (*transmit by
Hexadecimal code)
3)
When Data1 is 02
Data Min: 00 ~ Max: 14 (*transmit by
Hexadecimal code)
4)
When Data1 is 03
00: Just Scan
5)
When Data1 is 04
00: Off
6)
When Data1 is 05
Data Min: 00 ~ Max: 02 (*transmit by
Hexadecimal code)
Acknowledgement [v][ ][OK][Data01][Data02][x] [v][ ]
[NG][Data01][x]
*
Use the feature depending on your model.
20. ISM Method (Command: j p)(
To avoid having a fixed image remain on screen.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter
04: White Wash
08: Normal
20: Color Wash
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
21. Energy Saving (Command: j q)
To control the energy saving function.
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: off
01: Minimum
02: Medium
03: Maximum
04: Auto (Depending on model)
05: Screen off
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
22. Auto Configuration (Command: j u)
To adjust picture position and minimize image
shaking automatically. Auto configuration only works
in RGB-PC mode.
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
23. Channel Tuning (Command: m a)
To tune channel to following physical/major/minor
number.
(This feature is not available for all models.)
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01] [ ]
[Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
01: Left to Right
01: 16:9
01: On
)