BMW 3 Series Owner's Manual page 236

CONTROLS
System limits
General information
The limits of the Steering and Lane Control As‐
sistant system apply.
Additional information:
Steering and Lane Control Assistant, refer to
page 230.
Driver Attention Camera
Always monitor the traffic conditions.
The Driver Attention Camera detects whether or
not the driver is paying attention to the traffic
conditions.
The Driver Attention Camera may not be fully
functional in the following situations:
▷ When the Driver Attention Camera is covered
by the steering wheel.
▷ With sunglasses with high protection from in‐
frared light.
Depending on the
equipment version:
Automatic Lane Change
Assistant
Principle
The system additionally supports the driver when
changing lanes on multilane roads.
General information
The system uses the sensors of the steering and
lane control assistant.
236
Driver assistance systems
Online Edition for Part no. 01405A38F56 - VI/21
Safety information
Warning
The system cannot serve as a substitute for the
driver's personal judgment in assessing the
traffic situation. Based on the limits of the sys‐
tem, it cannot independently react to all traffic
situations. There is a risk of accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where appropri‐
ate.
Additionally, the notices for the Steering and
Lane Control Assistant apply.
Additional information:
Steering and Lane Control Assistant, refer to
page 230.
Functional requirements
▷ The functional requirements of the steering
and traffic jam assistant are fulfilled.
Functional requirements, refer to page 231.
▷ Driving on a road without pedestrians or cy‐
clists and with physical barriers to oncoming
traffic, such as crash barriers.
▷ Lane markings have been detected.
▷ Maximum speed approx. 110 mph, 180 km/h.
▷ The minimum speed is country-specific.
Switch lane change assist on/off
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. If necessary, "Driving"
5. "Steering Assistance"
6. "Automatic Lane Change"