BMW 3 Series Owner's Manual page 200

CONTROLS
Sensors
The system is controlled by the following sen‐
sors:
▷ Radar sensors, side, rear.
Additional information:
Sensors of the vehicle, refer to page 37.
Turning on/off
Turning on automatically
Active Blind Spot Detection is automatically acti‐
vated after departure if the function was
switched on at the completion of the last trip.
Switching on manually
Press the button.
The menu for the Intelligent Safety sys‐
tem is displayed.
If all Intelligent Safety systems were switched off,
all systems are now switched on.
"Configure INDIVIDUAL": depending on the
equipment version, the Intelligent Safety sys‐
tems can be individually configured. The individ‐
ual settings are activated and stored. As soon as
a setting is changed on the menu, all settings of
the menu are activated.
Press the button repeatedly.
The following settings are switched be‐
tween:
"ALL ON": all Intelligent Safety systems are
switched on. Basic settings are activated for the
subfunctions.
"INDIVIDUAL": the Intelligent Safety systems are
switched on according to the individual settings.
Some Intelligent Safety systems cannot be indi‐
vidually switched off.
Manual switching off
Press and hold this button.
200
Safety
Online Edition for Part no. 01405A38F56 - VI/21
All Intelligent Safety systems are switched off.
Button Status
Button lights up green: all Intelligent
Safety systems are switched on.
Button lights up orange: some Intelli‐
gent Safety systems are switched off
or currently unavailable.
Button does not light up: all Intelligent
Safety systems are switched off.
Setting the warning time
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. "Safety and Warnings"
5. "Active Blind Spot Detection"
6. Select the desired setting.
Setting the intensity of the steering
wheel vibration
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. "Steering Wheel Feedback"
5. "Vibration intensity"
6. Select the desired setting.
The setting is applied to all Intelligent Safety sys‐
tems.
Vehicles with side collision
mitigation: switching steering
intervention on/off
The steering intervention can be switched on
and off separately for Active Blind Spot Detec‐
tion and lane departure warning.
1. "CAR"
2. "Settings"
3. "Driver Assistance"