Sony FCB-CX12E Technical Manual page 13

Color camera module
Table of Contents

Advertisement

Slow shutter – Auto/Manual
When set to "Auto, " ensures that the slow shutter is set
automatically when the brightness drops. Effective only
when the AE mode is set to "Full Auto. "
Set to "Slow Shutter Manual" at shipment.
Note
The Slow Shutter Auto function is not available in WD mode.
ICR (IR Cut-Removable) Mode
An infrared (IR) Cut-Filter can be disengaged from the
image path for increased sensitivity in low light
environments. The ICR will automatically engage
depending on the ambient light, allowing the camera to
be effective in day/night environments.
When the auto ICR mode is set to ON, the image
becomes black and white.
Auto ICR Mode
Auto ICR Mode automatically switches the settings
needed for attaching or removing the IR Cut Filter.
With a set level of darkness, the IR Cut Filter is
automatically disabled (ICR ON), and the infrared
sensitivity is increased. With a set level of brightness,
the IR Cut Filter is automatically enabled (ICR OFF).
Also, on systems equipped with an IR light, the internal
data of the camera is used to make the proper decisions
to avoid malfunctions.
Auto ICR Mode operates with the AE Full Auto setting.
When Auto Slow Shutter is OFF (initial setting)
When Auto Slow Shutter is ON
Note
When in Auto_ICR_OFF state and WB data is added (default), a
malfunction may occur when the subjects largely consisting of blue
and green colors are taken.
Camera ID
The ID can be set up to 65,536 (0000 to FFFF). As this
will be memorized in the nonvolatile memory inside,
data will be saved regardless of whether it has been
backed up.
Effect
It consists of the following functions.
 Neg. Art: Negative/Positive Reversal
 Black White: Monochrome Image
Basic Functions
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents