Sharp LC-15C2E Service Manual page 8

LC-15C2E
• Precautions in handling the LCD panels.
1. Work in a clean room. (with humidities below 50%)
2. Be sure to wear an anti-static armband.
3. Handle the panels on an electroconductive mat.
4. Be careful not to fall, shake and shock the panels.
5. Use an ionizer. (within 30cm)
14. Remove the four lock screws from the LCD panel and remove the LCD panel.
15. Remove the diffusion sheet and prism sheet and D-BEFE.
16. Four reflectors in every direction are removed.
17. Remove the photoconductive plate.
18. Remove the fluorescent lamp.
19. Remove the two reflection sheets.
14
GATE-FFC
LCD Unit
Light Guide Sheet
Lamp Unit
17
(KLMP-0108CEZZ)
18
15
Diffusion Sheet
Prism Sheet
D-BEFE
14
16
Reflector
Reflection Sheet-1
19
(PSHEP0242CEZZ)
Reflection Sheet-2
(PSHEP0243CEZZ)
8
Shield Plate
16
Reflector