Gprs Attach; Access Point; Reset Access Point; Reset Setting - LG L1400 User Manual

GPRS Attach

(Menu 9.8.2)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
Note
n
If there is no GPRS coverage and you have chosen Power
On, the phone will periodically try to establish a packet data
connection.

Access Point

(Menu 9.8.3)
This feature sets the Profile during the WAP
connections. Please see page 51 for further detail.
The Profile menu under the Access Point feature will
display Add, Delete and Editor options, but the reason
why Activate option is not available is that there is no
way of knowing whether WAP will be used to activate
the content.

Reset Access Point

(Menu 9.8.4)
This allows Profile information to be restored to
original setting. For example, this option will restore
the Profile that has been deleted by the Delete All
selection from the Access Point (Menu 3.2) submenu.

Reset Setting

You can easily reset your phone to its default
configuration. To do so, proceed as follows.
1. Select the Reset Setting menu option.
2. Enter the 4-digit phone password.
Note
n
The password is preset to 0000.
Settings
Menu 9.9
75